HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD

The principle of the C hina cyclone dust collector  is to use a rotating airflow to generate centrifugal force from the dust to separate it from the airflow. The utility model has the advantages of simple and compact structure, small occupied area, low cost, convenient maintenance, high temperature and high-pressure resistance, and is suitable for dust with a very high concentration. The boiler multi-cyclone and multi-cyclone are only a member of cyclone type dust collector. How the cyclone type dust collector works The C hinese cyclone dust collector  is composed of a cylinder body, a cone, an intake pipe, an exhaust pipe, and an ash discharge chamber. The working process of the cyclone is: when the dust-containing gas enters the cyclone from the tangential inlet, the airflow will change from linear motion to circular motion. Most of the swirling airflow flows spirally downward from the cylinder toward the cone. This is called this the external swirling airflow. Th...

Brief introduction of Electromagnetic Valve For Water There are closed chambers in the solenoid valves for water use. There are through holes in different positions. Each hole leads to different oil pipes. In the middle of the chamber is a valve, and on both sides are two electromagnets. The magnet coil electrifying valve body on either side will be attracted to which side. By controlling the movement of the valve body, different oil drain holes will be blocked or leaked out, while the oil inlet hole is usually open. The hydraulic oil will enter different drain pipes and then push the piston of the cylinder through the pressure of the oil. The piston will drive the piston rod and the piston rod will drive the mechanical device. This controls the mechanical movement by controlling the current of the electromagnet. Working principle of Electromagnetic Valve For Water The electromagnetic dust collector   is a pilot solenoid valve with secondary opening. Its structure is mainl...

Dust removal frame, also known as dust baghouse cages , is an indispensable accessory for bag filter, used as a frame to support dust filter bag, it can be compatible with six, eight, ten, twelve, sixteen, eighteen, two Ten or twenty-four tendons. The skeleton is the "rib" of the filter bag, and it is formed by a special welding equipment. Is widely used in metallurgy, chemical industry, coking, power generation, non-ferrous metallurgy, steel, building materials, coal mines and other industries. Our dust collector manufacturer  has always been on the basis of equality and mutual benefit with domestic and foreign customers to establish long-term friendly trade relations, warmly welcome Chinese and foreign customers to call or letter us for business negotiations!