Skip to main content

How To Make The Dust Bag Play The Best Effect?

In order to allow companies to operate smoothly, many companies will take measures against the dust they cause. Therefore, many companies will install some dust collectors to reduce the emission of harmful gases. When an enterprise purchases a dust collector, it not only needs to purchase a good product, but also needs to select a dust bag and choose the equipment that is most suitable for its own company. Only when such a device exerts the best results can it ensure the enterprise. The normal operation. After installing such a device, companies not only need to maintain the equipment, but also need to arrange for full-time personnel to operate.



Dust removal bags in the dust collector is one of the key components. When companies choose such equipment, they not only need to choose a good brand, but also need to choose their own enterprise's dust collector according to their own company's actual situation. Although in the entire device, the cloth bag looks very weak, but this is a key component. If there is a problem with the bag in operation, it will not only ensure that the company's emission of gas is up to standard, but also will cause great harm to the surrounding environment. Therefore, in the entire enterprise, it is necessary to attach importance to environmental protection issues, as long as the normal operation of the company needs to check the operation of the dust collector.

When companies purchase dust collectors, they not only need to inspect the entire equipment, but also need to focus on the inspection of the dust bag and conduct a rigorous inspection on the appearance of the bag. When there are any small problems with the bag, it needs to attract the attention of the company and it needs to contact the manufacturer. After the dust remover has been used for a period of time, the enterprise needs to inspect and maintain the dust remover, and also needs to maintain the main parts such as the cloth bag. Learn more from Senotay.

Comments

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us

Electrostatic Dust Precipitator

  1. Introduction of electrostatic dust precipitators   The power supply of the electrostatic precipitator consists of a control box, a step-up transformer and a rectifier. The output voltage of the power supply also has a great influence on the dust removal efficiency. Therefore, the operating voltage of the electrostatic precipitator must be maintained at 40-75kV or even above 100kV.   2. Basic structure of electrostatic dust precipitators   The electrostatic dust precipitators  are composed of two parts: one part is the main system of the electrostatic precipitator; the other part is the power supply device that provides high-voltage direct current and the low-voltage automatic control system. The high-voltage power supply system supplies power to the step-up transformer, and the dust collector of the dust collector is grounded. The low voltage electric control system is used to control the temperature of the electromagnetic vibrating hammer, the ash discharging electrode, the ash c

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection syste