Skip to main content

The Basic Characteristics Of Dust Collector Replacement Filter Bags

To put it bluntly, the dust collector replacement filter bags are a kind of bag that can act as a filter. Under such a prerequisite, what should be satisfied is the basic needs of the bag in the actual situation, but the efficiency and frequency of using such bags are different because they are made of fiber or felt. The main pursuit is an efficient filter, conducive to dust stripping or durable effect.

The notable feature of the dust collector replacement filter bags is that the bag is a very fine fiber or a filter bag for oil absorption which is mainly composed of the necessary overflow layer, silkscreen and so on. It is mainly designed for a lot of oil or dust in the liquid, but the void ratio has been basically reached 80%, which has greatly improved the service life of the equipment, and its cleanliness is also many times the weight of its own weight. It is determined by the actual fluid or the characteristics of the oil, one of which can not be ignored is the basic oil flow rate.

In many cases, baghouse filter bags are made of filter bags with absolute precision, which are basically formed through effective forms of fiber hot melt, and the outer layer is made of a thickened material. At the same time, a very adequate filter layer can be provided. In such cases, it is usually done by a very effective large-caliber filter, mainly by enhancing the overall filtering effect and improving the ability to accommodate magazines effectively. It is no problem to increase the effective service life of the equipment. Another basic form of dust collector replacement filter bags is the silkscreen, mainly in the form of some nylon or polyester polymer materials, mainly to filter fine impurity or dust, and the greatest advantage is that they can be used repeatedly. Learn more about the product from Senotay.
Labels:

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us
Post a Comment
Read more

Electrostatic Dust Precipitator

  1. Introduction of electrostatic dust precipitators   The power supply of the electrostatic precipitator consists of a control box, a step-up transformer and a rectifier. The output voltage of the power supply also has a great influence on the dust removal efficiency. Therefore, the operating voltage of the electrostatic precipitator must be maintained at 40-75kV or even above 100kV.   2. Basic structure of electrostatic dust precipitators   The electrostatic dust precipitators  are composed of two parts: one part is the main system of the electrostatic precipitator; the other part is the power supply device that provides high-voltage direct current and the low-voltage automatic control system. The high-voltage power supply system supplies power to the step-up transformer, and the dust collector of the dust collector is grounded. The low voltage electric control system is used to control the temperature of the electromagnetic vibrating hammer, the ash discharging electrode, the ash c
Post a Comment
Read more

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection syste
Post a Comment
Read more