Skip to main content

Electromagnetic Valve For Water

Brief introduction of Electromagnetic Valve For Water
There are closed chambers in the solenoid valves for water use. There are through holes in different positions. Each hole leads to different oil pipes. In the middle of the chamber is a valve, and on both sides are two electromagnets. The magnet coil electrifying valve body on either side will be attracted to which side. By controlling the movement of the valve body, different oil drain holes will be blocked or leaked out, while the oil inlet hole is usually open. The hydraulic oil will enter different drain pipes and then push the piston of the cylinder through the pressure of the oil. The piston will drive the piston rod and the piston rod will drive the mechanical device. This controls the mechanical movement by controlling the current of the electromagnet.

Working principle of Electromagnetic Valve For Water
The electromagnetic dust collector is a pilot solenoid valve with secondary opening. Its structure is mainly composed of a pilot valve and a main valve. The main valve adopts a rubber sealing structure. When the position is constant, the movable iron core seals the guide valve port, the pressure inside the valve chamber is balanced, and the main valve port is closed. When the coil is electrified, electromagnetic force is generated to suck up the active iron core, and the medium in the main valve chamber leaks out from the guide valve mouth, resulting in pressure difference. The diaphragm or valve cup is quickly lifted, the main valve mouth opens, and the valve presents a path. When the coil is cut off, the magnetic field disappears, the movable iron core is reset, the guide valve mouth is closed, and the pressure in the guide valve and the main valve chamber is balanced, the valve is closed again.

Characteristics of Electromagnetic Valve For Water
The direct acting diaphragm structure has no pressure to start, and expands its application field.
The use of flat diaphragm structure is reliable and enhances the service life of the product.
The use of plastic coil can improve the safety of the product in many environments.

Use of Electromagnetic Valve For Water
Water solenoid valves are suitable for water or liquid as working medium, which can automatically or remotely control the opening and closing of water, oil, liquid and other working medium pipelines. Because the valve is sealed with rubber, the cleanliness of working medium is greatly reduced, and it has the characteristics of quick opening and closing and high reliability

Senotay is a professional industrial dust collection systems manufacturer. We sincerely invite and welcome people from all around the world to invest and create more values together.

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...
Post a Comment
Read more

Needle Felt Filter Bags

Anti-Static Polyester Needle Felt Bag Anti-static dust bag is currently ideal dust filter material, with good ventilation energy, high dust removal efficiency, and a certain degree of acid, alkali and heat resistance, weaving process uses a multilateral brushing, increased fabric thickness, elasticity, so the dust removal effect is good, the dust removal rate can reach 99.99%. The above two products have been widely used in petroleum, chemical, metallurgy, mining, cement and environmental protection dust removal and other industries. In addition to the process of producing a normal needle felt, the production of a polyester anti-electrostatic dust bag also requires the incorporation of conductive fiber yarns in warp yarns of base fabrics for the production of needle felts or the incorporation of conductive fibers and the like in chemical fibers. After the (ie explosion limit) in the event of static discharge sparks or external ignition and other factors, can easily lead to explo...
Post a Comment
Read more

Pneumatic Plug Valve

  P neumatic plug valve  is a main control equipment for the flow or delivery of powder, crystal grain, granular materials and small pieces of material. It is widely used in metallurgy, mining, building materials, food, chemical industries to control flow changes or cut off quickly. Pneumatic flapper valve has the advantages of simple structure, flexible operation, light weight, no jamming, and is especially suitable for the transportation and flow regulation of all kinds of solid materials and about 50mm block and lump materials. The installation is not limited by the angle and is easy to operate. Can adjust the scale at any time.   Structural features: Simple structure, flexible operation, light weight, no jamming, fast cutting, especially suitable for all kinds of non-viscosity solids, powders and granules less than Φ10mm, the transportation of crystal grain and flow regulation, installation is not limited by the angle , Easy to operate, can adjust the opening degree a...
Post a Comment
Read more