Skip to main content

Baghouse in Cement Plant

 Most of the bag filters in cement industry.

Large-scale baghouse filter technology has attracted the recognition and attention of domestic cement workers. Today, cement kiln tail baghouse filter has been widely used.

Objectively speaking, both the electrostatic precipitator and the baghouse filter have high dust-collecting effect. As long as the design is selected correctly, the product quality is good, and the maintenance operation is reasonable, the national emission standards can be guaranteed. In comparison, due to the difference in equipment structure and dust removal and cleaning mechanism, when the kiln condition is unstable and the thermal parameters deviate from the original design index, the adaptability of the bag filter is stronger.

 

The baghouse filter can capture fine dust.

With the development of the filter material industry, new products have been continuously discovered, and it has been chosen to meet the filter material for capturing fine dust, which greatly improves the dust removal efficiency.

 

Adaptability to environmental protection requirements.

As people's requirements for the quality of the living environment continue to improve, the government will inevitably gradually improve environmental standards according to national conditions. At present, the electrostatic precipitator has to further reduce the concentration of the outlet technology. Only by increasing the area of the sediment plate to improve the efficiency of dust capture can we reduce the a mount of emissions. This will inevitably increase the size and investment of the equipment, and the bag filter can meet the new emission requirements simply by adjusting the cleaning frequency.

 

Operation and maintenance are simple and reliable.

During the operation of cement kiln, when the kiln is opened or the abnormal kiln condition is treated, when the fuel quantity is increased, the air volume is insufficient, or the fuel and air are not mixed uniformly, when the kiln temperature is too low to make the fuel burn incomplete, it is often possible. A large amount of CO combustible gas is produced. And too much unburned pulverized coal powder is deposited in the baghouse filter. In addition, most kiln bag dust collectors operate under negative pressure and leak air into the tight piping of the equipment. Whether it is an electrostatic precipitator or a baghouse filter, if there are two kinds of conditions in the machine (ie, there are combustible substances and combustion-supporting oxygen in the machine), once there is an open flame, there is also a blast. For an electrostatic precipitator, a discharge spark due to a high-voltage electric field will excite its blast, which is more likely to ignite. Therefore, the kiln tail must be equipped with a CO and oxygen analyzer to ensure the safe operation of the electrostatic precipitator. For the baghouse filter, the safety of the electrostatic precipitator is greater because it does not have the condition of generating open flame. It is not necessary to add strictness to its control requirements, so its operation is relatively simple and reliable.

Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is a professional dust collector manufacturer, we provide professional for designing and making environmental protection equipment, industrial dust collection systems and etc. Want to know more, please contact us.



Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...