How Does The Electromagnetic Pulse Valve In The Bag Dust Collector Work?

The electromagnetic pulse valve can be said to be the switch in the ash cleaning system of the bag dust collector. When the dust-containing gas enters the lower part of the box and rises evenly through the guide plate to the dust-removing bag, the large particle dust will first fall into the dust hopper of the bag dust collector because of the collision, and the dust will be blocked on the outer surface of the filter bag. The clean gas will enter into the dust-removing bag and discharge from the outlet of the bag dust collector through the bag mouth and upper box .

With the increasing of dust on the outer surface of the filter bag, the resistance of the filter bag is also increasing, which makes the air volume become smaller. When the resistance of the equipment reaches the value set by the manufacturer, the pressure difference monitoring system will send out a signal, and then the dust cleaning mechanism of the bag dust collector will start to work.

The compressed air is ejected from the pulse valve and injected into the dust filter bag through the blowpipe and nozzle. The dust filter bag will instantly expand and vibrate, and the vibration will make the dust on the surface of the filter bag come out and fall into the dust hopper of the bag dust collector. It is then discharged by the ash relief valve. The system adopts automatic or manual ash cleaning (The automatic ash cleaning settings include pressure difference ash cleaning, timing ash cleaning and single warehouse ash cleaning). According to the selected mode, the pulse bag dust collector carries on the ash cleaning to each warehouse room in turn, and the silo room that completes the ash cleaning will immediately return to the state of continuing dust removal.

Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is a professional dust collection system manufacturer. We provide Baghouse Filter, Electrostatic Dust Collector, industrial dust collection systems, electromagnetic dust collector and so on. Want to know more? Please contact us.

Comments

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us

Electrostatic Dust Precipitator

1. Introduction of electrostatic dust precipitators The power supply of the electrostatic precipitator consists of a control box, a step-up transformer and a rectifier. The output voltage of the power supply also has a great influence on the dust removal efficiency. Therefore, the operating voltage of the electrostatic precipitator must be maintained at 40-75kV or even above 100kV. 2. Basic structure of electrostatic dust precipitators The electrostatic dust precipitators are composed of two parts: one part is the main system of the electrostatic precipitator; the other part is the power supply device that provides high-voltage direct current and the low-voltage automatic control system. The high-voltage power supply system supplies power to the step-up transformer, and the dust collector of the dust collector is grounded. The low voltage electric control system is used to control the temperature of the electromagnetic vibrating hammer, the ash discharging electrode, the ash c

Ash Discharge Valve

The opening and closing part of the ash discharge valve electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection syste

HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD

Search This Blog