Skip to main content

Metal Fiber Filter Bag for High Temperature Flue Gas and Dust Removal

 1. The characteristics of metal fiber high temperature dust collector bags

 

The metal fiber high temperature dust collector bag is made of micron-sized metal fiber sintered filter material as raw material, and is welded. The metal fiber sintered felt filter medium is composed of a three-layer composite of metal plate mesh, coarse metal fiber and fine metal fiber. Vacuum sintered into a whole to form a three-dimensional network structure.

 

High temperature dust collector bags have the characteristics of high porosity, large specific surface area, uniform pore size distribution, high dirt holding capacity, and high filtration accuracy. In addition, it has high temperature resistance, corrosion resistance, high efficiency, low emission concentration, low operating resistance, long life, renewable, energy saving and other advantages, with excellent filtering performance, which is ideal high-temperature flue gas dust removal filter material, and has been widely used in industrial smoke In the field of gas dust removal, especially in high temperature, strong corrosion and harsh working conditions such as chemical industry, metallurgy, building materials, electric power, petroleum, and new energy.

 

2. Material and scope of application of metal fiber high temperature dust collector bags

 

When the operating temperature is less than 400℃, 304 and 316L materials can be selected, 304 material has good temperature resistance, 316L material has better temperature resistance and better corrosion resistance;

 

When the operating temperature is 400-600℃, 310S and 314 materials can be selected, which have the ability to resist high temperature oxidation;

 

When the high temperature is greater than 600°C, iron-chromium-aluminum materials can be selected; other materials such as Hastelloy and nickel are available as required.

 

Technical advantages:

 

High temperature resistance, corrosion resistance, high strength, wear resistance, no perforation, no break;

 

High filtration precision, high dust removal and interception efficiency, can meet the ultra-low emission requirements, and the emission concentration of particulate matter <5mg/Nm3;

 

Good air permeability, low resistance, low operating energy consumption, high wind speed;

 

Easy to clean dust, online back-blowing and offline cleaning, long service life, good filter bag regeneration performance;

 

It can be recycled and processed without causing secondary pollution to the environment;

 

Good conductivity, to avoid accidents caused by static electricity, flameproof and explosion-proof;

 

Long service life, the product life can be as long as 3 to 5 years, which is 4 to 6 times the service life of cloth bags.

 

Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is a professional dust collection system manufacturer. We provide ash valve, tops elevator buckets, ventilation butterfly valve, pulse jet type bag filter, electromagnetic pulse valve, bag supporting cages, high temperature fiberglass filter bag, polyester needle felt filter bags, Baghouse Filter, Electrostatic Dust Collector and so on. Want to know more? Please contact us.

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...