Skip to main content

Working Principle and Characteristics of the Unloader

 1. The working principle of the unloader

 

Unloaders are divided into three categories: ordinary type, pressure-resistant type, and high-temperature type. The unloader can be driven at a uniform speed to continuously discharge materials at a controlled rate, or driven at an indefinite speed, using the unloader as a feeder.

 

(1) Common type of unloader:

 

It can be used for normal materials below 150 degrees and normal temperature, and it can continuously and evenly feed the material into the conveying pipe. In the system and the separation dust collection part, it can also function as a unloader.

 

(2)Pressure-resistant unloader:

 

It uses a closed rotor, which can be widely used in suction and pressure-feed air conveying systems and negative pressure conveying equipment. The rotating unloader can ensure that the air pressure in the conveying pipe does not leak and can safely convey and collect materials, and it can withstand pressure and also has those functions of ordinary ones.

 

The characteristics of the unloader

 

(1) The unloader adopts the principle of planetary rotation, the input and output are on the same axis, and it has the uniqueness of being directly connected with the motor, so it has a compact structure, beautiful appearance, small size, and light weight.

 

(2) The unloader is reliable and stable in operation, low in noise, low in failure, and long in life. The teeth are made of ductile iron and bearing steel. Moreover, it has good performance and high wear resistance.

 

(3) Bearings, gear boxes, keep away from the valve body, avoid the influence of high temperature and dust, the front and rear covers have good sealing performance, prevent dust from leaking, and extend the service life of motor parts and lubrication systems.

 

(4) The unloader has strong overload capacity and small impact resistance moment of inertia, which is suitable for frequent starting and reverse rotation.

 

(5) If users need special specifications, unloaders such as motors and sprocket drives can be manufactured.

 

Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is a professional dust collection system manufacturer. We provide ash valve, tops elevator buckets, ventilation butterfly valve, Baghouse Filter, Electrostatic Dust Collector and so on. Want to know more? Please contact us.



 

Labels:

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...
Post a Comment
Read more

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection s...
Post a Comment
Read more

High Quality Dust Bag Is The Manufacturer'S Gold Signboard

Under the socialist market economic system, the quality of dust bag manufacturers is fundamental to the survival and development of manufacturers of dust bag manufacturers. Dust bag manufacturer manufacturers need to produce dust bag manufacturers, they must strive to grasp the quality of dust bag manufacturers produced, and strive to put the quality of dust bag manufacturers. Do a good job, and do the best, so that manufacturers of dust bag manufacturers can withstand the storm of the market economy. The more production opportunities the manufacturer of dust bag manufacturers have, the greater the greater room for survival is, the more likely they will become bigger and stronger. Good quality dust bag manufacturers, is undoubtedly a gold sign, can be a good consumer of dust bag manufacturers manufacturers image and strong appeal. As long as the quality of the dust bag manufacturers is excellent, it can spread like a plague quickly among consumers, but it does not need to be advertise...
Post a Comment
Read more