Skip to main content

How to Choose the Right Industrial Dust Removal Equipment?

  

1. Factors for choosing industrial dust collector

 

Relevant factors that need to be considered when choosing an industrial dust collector: such as dust removal efficiency, equipment location, and available space; equipment investment and economic factors such as operation and maintenance costs must also be considered, of which dust removal efficiency needs to be focused. In this regard, the selected industrial dust collector also needs to meet the emission concentration specified by the emission standard.

 

 

2. The basis for choosing industrial dust collector

 

1. Set up the basic parameters according to the local environmental protection and environmental assessment requirements, and use this as a requirement to seek qualified industrial and dust collector manufacturers to carry out specific dust removal plans and implementation.

 

2. Choose the corresponding dust removal equipment according to different working conditions;

 

a. For floating dust, dust collectors with large air volume and large suction caliber are generally selected, which are collectively referred to as industrial dust collectors;

 

B. For static dust and large particles, industrial dust collectors with high negative pressure and small suction calibers are generally selected. These types of industrial dust filters are collectively referred to as industrial vacuum cleaners;

 

C. In addition, according to the nature of the dust, choose whether to need an explosion-proof dust collector, whether to need a water-filtered dust collector, and choose a bag filter or a filter cartridge dust collector according to the size of the dust particles.

 

As a dust collection system manufacturer our company has always been on the basis of equality and mutual benefit with domestic and foreign customers to establish long-term friendly trade relations, warmly welcome Chinese and foreign customers to call or letter us for business negotiations!

 

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...