Skip to main content

Polyester Filter Bag

 1. Introduction of polyester filter bag

 

In recent years, countries around the world have made many efforts in the treatment of environmental pollution and achieved great results. In the treatment of air pollution and material recovery, bag dust removal has achieved good results. The technical core of bag dust removal is the filter material. Bag dust removal is using polyester filter felt to filter the dust in the gas.

 

2. Performance requirements of polyester filter bag

 

People have many requirements for the performance of filter media of polyester filter bag. The main performance requirements are: large air handling capacity, low resistance, long life, and low price.

 

The filter cloth used for dust filtration mainly consists of organic woven filter cloth and needle punched filter cloth.

 

Woven filter cloth is made of twisted warp and weft yarns interlaced on a plane, with a two-dimensional structure. The woven filter material requires a great degree of tightness when weaving the cloth, and the density of the yarn itself and the interweaving part of the filter material is also higher. The actual total opening rate is about 30%, and the resistance of the filter material is greater. The air handling capacity is small, and most of the dust-containing gas can only pass through the pores between the warp and weft threads. Because the pores are large and the direct dust is easily penetrated, it can only be better after the dust layer is formed on the woven fabric. The collection efficiency is low at the beginning of use and a period of time after cleaning. In addition, dust removal is a working procedure that constantly occurs in bag dust removal, which determines the low efficiency of woven filter cloth in bag dust removal.

 

3. Application of polyester filter bag

 

Polyester filter bags are used for air pollution control and material recovery, and are suitable for working at a temperature of 125°C-140°C.

 

As an industrial dust collection systems manufacturer our company has always been on the basis of equality and mutual benefit with domestic and foreign customers to establish long-term friendly trade relations, warmly welcome Chinese and foreign customers to call or letter us for business negotiations!

 

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...