Skip to main content

PTFE Filter Bags

  

1. Introduction of PTFE filter bags

PTFE is polytetrafluoroethylene, also known as Teflon, is one of the more high-end varieties of bag filter materials. The PTFE synthetic fiber filter bag is a filter bag made of a unique material. It can withstand acid and alkali corrosion in the entire PH value range at a continuous operating temperature of 240℃ and an instantaneous temperature of 260℃. The PTFE synthetic fiber filter bag has excellent self-lubricity, does not absorb moisture, and can withstand ultraviolet radiation. However, the wear resistance of the PTFE fiber filter material is general, so there are stricter requirements (finishness) for the filter bag frame. PTFE fiber filter bags are more suitable for harsh conditions that require corrosion resistance and high requirements for filter material service life.

 

Polytetrafluoroethylene synthetic fiber filter bags can be used for flue gas treatment in coal-fired boilers, garbage incineration, carbon black production, titanium dioxide (TiO2) production and other processes. In the primary smelting, refining and chemical production of some metals, there are also applications for PTFE filter bags.

 

2. The characteristics of PTFE filter bags

 

The surface of the film is smooth and resistant to chemical substances. It is laminated to the surface of ordinary filter materials to act as a disposable dust layer, trapping all the dust on the surface of the film to achieve surface filtration. It has the unparalleled superiority of traditional filter materials.

 

It has the characteristics of high peel strength, large air permeability, low resistance, and uniform pore size distribution.

 

Installed in the dust removal equipment, it will quickly and effectively intercept the ultrafine dust calculated in microns. The dust removal efficiency of the PTFE filter bag is more than 99.99%. It is an effective and economical new filter material for industrial dust filtration and material recovery.

 

The obvious difference from other pure high-performance fiber (PPS, glass fiber, P84, aramid) filter media is: as time goes by, PTFE will not age, accompanied by the joint action of high temperature gas, corrosive gas, and liquid. The breaking strength of the PTFE base fabric will not be attenuated, and the service life will be greatly improved.

 

As a dust collection system manufacturer, Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is located in Botou City, a famous "dust-removing hometown." The factory is located in Xihuan Industrial Park, Botou City, Hebei Province, which is located in the center of Beijing, Tianjin, Jinan, and Shijiazhuang. Beijing-Shanghai Expressway, Beijing-Shanghai Railway, 106 State Road, 104 National Road walk through the city, the traffic is very convenient.

 


Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...
Post a Comment
Read more

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection s...
Post a Comment
Read more

Standard Single Layer Felt Filter Bags

  Ⅰ . Introduction of standard single-layer felt filter bag   Industrial polypropylene (PP) and polyester (PE) standard felt filter bags, single-sided slip surface to prevent fiber migration, gradient pore deep filter type, no internal support layer. Use nearly 30 kinds of fibers with different diameters, and use fiber mixing equipment to make filter bags.   Ⅱ . Features of standard single-layer felt filter bag   1. Stitching method: ultrasonic welding or thread suture.   2. Sealing ring: polypropylene and polyester SDS, STS, galvanized steel ring or stainless steel ring.   3. Sealing ring connection method: ultrasonic welding or thread stitching.   4. Accuracy range: 1, 3, 5, 10, 25, 50, 75, 100, 150, 200 microns.   5. Efficiency: relative accuracy, single filtration efficiency is 85%.   6. Surface treatment: Smooth surface treatment to prevent fiber and leachate from freeing.   7. Material grade: fully comply with FDA grade requirement...
Post a Comment
Read more