Skip to main content

The Main Cause of Damage of Dust Filter Bag

 1. Filter air speed

The filter air speed of the bag type dust collector is too high, which is the main reason for the damage of the cloth dust collector bags. In recent years, some companies have blindly reduced equipment costs and increased profits: when designing a bag type dust collector, the filter air speed was increased. There was no obvious response in a short time, but the service life of the filter bag was greatly shortened. In this way, instead of saving money for customers, it brought a very large economic burden and wasted time.

 

2. Operating temperature

The key to the filter bag is to select the cloth dust collector bags suitable for the corresponding dust temperature. If the temperature is too high, the selected cloth dust cloth collector bags will exceed the normal operating temperature, thus shortening the service life, and even burning the filter bag in a short time. Therefore, when selecting a filter bag, the inlet temperature of the dust collector must be measured and calculated, and the corresponding cloth dust collector bags should be selected.   

 

3. Product quality

The processing of cloth bags is particularly important. In recent years, some small-sized manufacturers have used small sewing machines as processing equipment, and used low-quality thread as raw materials during processing, and the processing level is outdated, which makes the cloth dust collector bags split, and cracked after they are not used for a long time. Although the small-sized bags can also be used, after bearing much dust, they will fall off after a period of time.

 

As a dust collector manufacturer, we have types of related products for sale, if you have needs, please contact us.

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...