Skip to main content

ZC Type Mechanical Rotary Blow Flat Bag Filter

 ZC Type Mechanical Rotary Blow Flat Bag Filter Introduction:

The dust collector adopts a circular body structure with uniform force, good anti-knocking performance, compact structure, high-pressure blower and blower cleaning, and is not limited by the air source condition, and uses the resistance to automatically control the blowback dust to save energy and prolong the use of the bag; Regional indoor installations can be installed outdoors in other areas, and can be widely used in many sectors such as machinery, foundry, mining, smelting, building materials, and food chemical.

 

Users should pay attention to the high temperature, high concentration, fine particles of dust should choose A type, and vice versa B type is appropriate, such as the concentration of more than 15g/m3 should be preceded by a cyclone dust collector(For coarse nuclear dust can be relaxed as appropriate).

 

ZC Type Mechanical Rotary Blow Flat Bag Filter Model indication:

144ZC-II-500-ANP570 rotary counter blowing flat bag filter.

 

Item 1: 144 is the number of flat filter bags (only)

 

Item 2: ZC refers to the beginning of the pinyin of the rewinding blow, in which "Z" refers to the beginning of the Chinese pinyin of "turning" and "C" refers to the beginning of the Chinese pinyin of "blowing".

 

Item 3: II- refers to the design number.

 

Item 4: 500 refers to the length of the bag (meters).

 

Item 5: According to the different filter speed V, the dust collector is divided into A type and B type size. A type size is used for an air volume of V=1.0~1.5/min. Type B size is used for V = 2.0~2.5/minute air volume.

 

Item 6: According to the rotating wind direction of the population, it can be divided into N-rotation and S-rotation. N indicates that the inlet rotates counterclockwise, S indicates that the inlet rotates clockwise, and the serialized drawings are rotated counterclockwise (that is, N-rotation).

 

Item 7: According to the form of the outlet duct, there are two kinds of exits: the flat exit and the lower exit. P means the flat exit, X means the lower exit, and the serialized drawings are drawn as flat exits (that is, P-type).

 

Item 8: 570 is the nominal filter area (m3).

Want to know the details of industrial dust collection systems, contact us.

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...