Skip to main content

P84 High Temperature Dust Bag

 P84 High Temperature Filter Bags description:

 

Material: Polyimide (P84)

 

Common industries and conditions: for chemical, metal smelting, waste incineration, cement kiln tail, coal-fired boilers and other moderate corrosion of flue gas dust collection.

 

Note: excellent short-term high-temperature ability.

Material:

Polyimide (P84)

Weight

500m²

thickness

2.0mm

Air permeability

>14m³/m²·min

Longitudinal pull

>800N/5×20cm

Latitudinal tension

>1200N/5×20cm

Longitudinal extension

<35℅

Zonal elongation

<55%

Operating temperature

260℃

Post-processing

Singeing

 

High Temperature Dust Collector Bags Specification

P84 High temperature filter bag parameters

Compositions

Polyimide

Weight (g/m2)

550

Fhickness (mm)

2.00

Air permiability (dm3/m2/min)

250

Tensile strength (N/5x20cm)

warp

800

weft

1100

Tensile enlongation (%)

warp

10

weft

15.00

Thermal shrinkage ( at 240°C %)

1

Continuous working temperature (degree ℃)

240

Short time Working temperature (degree ℃)

260

Anti-alkali

Excellent

Anti-abrasion

Excellent

Suitable for working conditions

Chemical industry, waste incineration, cement kiln tail, metal smelting, coal-fired boilers and other moderately corrosive flue gases.

Finishing treatment

Singeing, het-setting, calendaring

 

P84 Filter Bags Advantages

P84 filter bag has chemical stability, acid resistance, alkali resistance, High temperature dust collector bag corrosion resistance is high temperature resistance (240-260°C) and good oxidation resistance

High temperature dust collector has excellent wear resistance and high air cloth ratio. Stable operation and long service life, generally use more than 3 years.

 

How Air to Cloth Ratio Affects the Performance of your Filter Bags

The proportional relationship of air to cloth area can be used to calculate the total amount of bag filter treatment. Proper air-to-fabric ratios allow bag filter systems to operate at peak performance, extend filter life, reduce equipment operating costs, and easily allow you to meet air quality goals. P84 filter bag can run at high temperature around 240℃ for a long time. Its acid and alkali resistance is very good, and it can be used in very harsh working environment. Usually, the lower the ratio of your air to cloth, the faster the flow rate per unit area of the gas. The lower it will be, the better your air quality will be, the less wear and tear on the filter bag will be, and the longer the filter bag will last.

 

As a dust collector manufacturer, we can offer different kinds of china dust collection bag for sale, if you have any needs, please leave us a message.



Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...