Skip to main content

Polyester Acupuncture Felt Bag

 Polyester needle felt dust bag in addition to a common felt-type filter cloth unique high porosity, good air permeability, dust collection efficiency, long service life. Polyester needled felt dusting bag polyester high-quality fine denier fiber filament, with advanced equipment to produce polyester (polyester) fiber needled filter mat, can be a variety of fiber evenly quantitatively mixed, and then use more than one mixed open cotton unit and combing.

 

The unit is conducive to the fiber between the different layers of fiber composite, gradient transformation. Polyester dust bag has the advantages of high voidage, good air permeability, high dust collection efficiency, long service life, etc., due to its unique felt filter cloth, due to its moderate temperature rating, instant up to 150°C, acid resistance, Alkali-resistant features and has a very good wear resistance, so it is a large amount of filter media used in a species. The polyester needle felt dust bag has the advantages of high porosity, good air permeability, high dust collecting efficiency, long service life, etc., due to its moderate temperature resistance class.

 

Polyester waterproof anti-acupuncture filter felt (waterproof)

Material:

Polyester

Weight

500m²

thickness

1.8mm

Air permeability

>8-12m³/m²·min

Longitudinal pull

>900N/5×20cm

Latitudinal tension

>1500N/5×20cm

Longitudinal extension

<25℅

Zonal elongation

<45%

Operating temperature

150℃

Post-processing

Waterproof, rolling light

Polyester heat-resistant acupuncture filter mat

Material:

Polyester

Weight

500m²

thickness

1.8mm

Air permeability

>8-12m³/m²·min

Longitudinal pull

>900N/5×20cm

Latitudinal tension

>1500N/5×20cm

Longitudinal extension

<25℅

Zonal elongation

<45%

Operating temperature

150℃

Post-processing

Waterproof, rolling light

Polyester high-temperature resistant film acupuncture filter felt

Material:

Composite fiber

Weight

700m²

thickness

2.2mm

Air permeability

>2-3m³/m²·min

Longitudinal pull

>1500N/5×20cm

Latitudinal tension

>1800N/5×20cm

Longitudinal extension

<10℅

Zonal elongation

<15%

Operating temperature

160℃-180℃

Post-processing

Singeing, calendering, shaping, laminating

 

As an industrial dust collection systems manufacturer, we are engaged in separating the particles and quality dust from the industrial exhaust gas, turning waste into treasure to be recycled with the dust collector equipment. Senotay offers high-quality dust collection system for sale including long bag pulse dirt collector, gas box and stand-alone pulse dirt collector, electrostatic precipitator, electric powered auxiliary tar, etc. Warmly welcome for business negotiations!



Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...