How Can Reduce The Probability Of Aging Of Dust Bag

One: Temporarily strengthen cleaning.

This will prevent clogging of the dust bag and reduce the resistance of the dust bag.

Two: The correct choice of dust bag.

Choose a dust bag that is suitable for working in a dusty environment, so as to avoid hardening and shrinkage of the dust bag due to the abnormally high working environment.

Three: The new craft old bag should not be mixed.

In this way, it is possible to avoid frequent replacement of inspections due to different damage time of the dust bag, and thus affect the normal operation of the bag filter.

Electromagnetic pulse valve

Four: The dust bag has looseness.

Dust collector bag is best not to hang too loose or too tight, hanging too loose can easily lead to dust bag dust, too tight, then you can pull the bad dust bag.

Comments

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us

Electrostatic Dust Precipitator

1. Introduction of electrostatic dust precipitators The power supply of the electrostatic precipitator consists of a control box, a step-up transformer and a rectifier. The output voltage of the power supply also has a great influence on the dust removal efficiency. Therefore, the operating voltage of the electrostatic precipitator must be maintained at 40-75kV or even above 100kV. 2. Basic structure of electrostatic dust precipitators The electrostatic dust precipitators are composed of two parts: one part is the main system of the electrostatic precipitator; the other part is the power supply device that provides high-voltage direct current and the low-voltage automatic control system. The high-voltage power supply system supplies power to the step-up transformer, and the dust collector of the dust collector is grounded. The low voltage electric control system is used to control the temperature of the electromagnetic vibrating hammer, the ash discharging electrode, the ash c

Ash Discharge Valve

The opening and closing part of the ash discharge valve electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection syste

HEBEIOUTAI ENVIRONMENTAL PROTECTION EQUIPMENT CO.,LTD

Search This Blog