Skip to main content

How Does The Electromagnetic Pulse Valve In The Bag Dust Collector Work?

The electromagnetic pulse valve can be said to be the switch in the ash cleaning system of the bag dust collector. When the dust-containing gas enters the lower part of the box and rises evenly through the guide plate to the dust-removing bag, the large particle dust will first fall into the dust hopper of the bag dust collector because of the collision, and the dust will be blocked on the outer surface of the filter bag. The clean gas will enter into the dust-removing bag and discharge from the outlet of the electromagnetic dust collector through the bag mouth and upper box .

With the increasing of dust on the outer surface of the filter bag, the resistance of the filter bag is also increasing, which makes the air volume become smaller. When the resistance of the equipment reaches the value set by the manufacturer, the pressure difference monitoring system will send out a signal, and then the dust cleaning mechanism of the bag dust collector will start to work.

The compressed air is ejected from the pulse valve and injected into the dust filter bag through the blowpipe and nozzle. The dust filter bag will instantly expand and vibrate, and the vibration will make the dust on the surface of the filter bag come out and fall into the dust hopper of the bag dust collector. It is then discharged by the ash relief valve. The system adopts automatic or manual ash cleaning (The automatic ash cleaning settings include pressure difference ash cleaning, timing ash cleaning and single warehouse ash cleaning). According to the selected mode, the pulse bag dust collector carries on the ash cleaning to each warehouse room in turn, and the silo room that completes the ash cleaning will immediately return to the state of continuing dust removal.
Are you looking for dust collector manufacturer ?
Senotay is professional for designing and making environmental protection equipment and dust removal parts production and processing.
LEAVE US MESSAGE

Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...