Skip to main content

PPS Filter Felt Bag

PPS Filter Bag description:

Material: Polyphenylene sulfide (PPS)

Common industries and conditions: for coal-fired boilers, waste incineration, metal smelting, chemical industry and other low-flue gas dust collection.

Remarks: poor oxidation resistance, strong acid, and alkali resistance.
Material:
Polyphenylene sulfide (PPS)
Weight
550m²
thickness
2.0mm
Air permeability
> 12m³ / m² · min
Longitudinal pull
＞900N/5×20cm
Latitudinal tension
＞1100N/5×20cm
Longitudinal extension
＜ 25℅
Zonal elongation
<45%
Operating temperature
160 ℃ -190 ℃
Post-processing
PTFE

Senotay is professional for designing and making environmental protection equipment and industrial dust collection systems. We sincerely invite and welcome people from all around the world to invest and create more values together.

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...
Post a Comment
Read more

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection s...
Post a Comment
Read more

Standard Single Layer Felt Filter Bags

  Ⅰ . Introduction of standard single-layer felt filter bag   Industrial polypropylene (PP) and polyester (PE) standard felt filter bags, single-sided slip surface to prevent fiber migration, gradient pore deep filter type, no internal support layer. Use nearly 30 kinds of fibers with different diameters, and use fiber mixing equipment to make filter bags.   Ⅱ . Features of standard single-layer felt filter bag   1. Stitching method: ultrasonic welding or thread suture.   2. Sealing ring: polypropylene and polyester SDS, STS, galvanized steel ring or stainless steel ring.   3. Sealing ring connection method: ultrasonic welding or thread stitching.   4. Accuracy range: 1, 3, 5, 10, 25, 50, 75, 100, 150, 200 microns.   5. Efficiency: relative accuracy, single filtration efficiency is 85%.   6. Surface treatment: Smooth surface treatment to prevent fiber and leachate from freeing.   7. Material grade: fully comply with FDA grade requirement...
Post a Comment
Read more