Skip to main content

Ash Discharge Valve


The opening and closing part of the electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters.

Principle of Ash Discharge Valve: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter.

Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control.

Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation.
Electric Ventilation Butterfly Valve is mainly used in the dusty cold wind or hot air gas pipelines of ventilation, environmental protection projects in metallurgy, chemical industry, building materials, power stations, glass and other industries, as a gas medium to regulate the flow or cutting device.

Pneumatic plug-in valve is a main control equipment for the flow or delivery of powder, crystal grain, granular materials and small pieces of material. It is widely used in metallurgy, mining, building materials, food, chemical and other industries to control flow changes or cut off quickly. Pneumatic flapper valve has the advantages of simple structure, flexible operation, light weight, no jamming, and is especially suitable for the transportation and flow regulation of all kinds of solid materials and about 50mm block and lump materials. The installation is not limited by the angle and is easy to operate. Can adjust the scale at any time. Structural features: Simple structure, flexible operation, light weight, no jamming, fast cutting, especially suitable for all kinds of non-viscosity solids, powders, and granules less than Φ10mm, transportation of crystal grain and flow regulation, installation is not limited by the angle , Easy to operate, can adjust the opening degree at any time. Mainly used for building materials, metallurgy, mining, electricity, chemicals, glass, light industry, food and other industries, the top, bottom and import and export. It is the reason that the control flow changes greatly, starts frequently, and cuts off rapidly.
Company Profile
Positioned in Botou City, a well-known "dust-removing hometown", Hebei Ou Tai Environmental Protection Equipment Co., Ltd. is expert for designing and making environmental safety gear and dust removal parts production and processing. We use the advanced manufacturing equipment, extraordinary manufacturing technology, and strict first-class assurance device beneath the education of users to grant excellent manufacturing installation and protection services.

The most important motive of the company's products is to separate the particles and quality dust from the industrial exhaust gas, turning waste into treasure to be recycled. As the dust collection system manufacturer, main all types of dirt elimination equipment and accessories production: including long bag pulse dirt collector, gas box and stand-alone pulse dirt collector, electrostatic precipitator, electric powered auxiliary tar, etc. Warmly welcome forbusiness negotiations!



Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...