Skip to main content

High Temperature Fiberglass Filter Bag

The glass fiber continuous filter cloth is composed of continuous glass fiber yarns for both warp and weft yarns. The specially processed and manufactured glass fiber fabric is an ideal high-temperature resistant filter material. The filter material has strong strength, smooth surface, and easy to peel off dust. Temperature can be used at 280 degrees for a long time, corrosion resistance, high dust removal efficiency. Widely used in carbon black / iron / cement / calcium carbide / electrochemical / steel and other industries.

High Temperature Fiberglass Filter Bag performance:
Good heat resistance, long-term use below 280°C;
Good dust stripping, so that the energy consumption of cleaning is low;
Good dimensional stability, the shrinkage of the fiber itself is zero at the use temperature;
Good resistance to chemical attack, except hydrofluoric acid, strong acid, and strong alkali, it is stable to other media;
No water absorption, no moisture absorption;
The filtration efficiency can reach 99.5% or more.
Dust Collector Accessories
The industrial dust collection systems include cloth bag for bag filter, skeleton (bag cage), electromagnetic pulse valve, pulse controller, star-type unloading valve, etc., anode plate for electrostatic dust collector, barbed wire, cathode and anode rapping, porcelain bottle, porcelain Shaft and other dust collector accessories. Suitable for accessories such as bag dust collectors, cyclone dust collectors, wet dust collectors, water film dust collectors, electrostatic dust collector and other environmental protection dust removal equipment.

Labels:

Comments

Post a Comment

Popular posts from this blog

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...
Post a Comment
Read more

Ash Discharge Valve

The opening and closing part of the ash discharge valve  electric plug valve is a gate plate, and the direction of movement of the gate plate is perpendicular to the direction of the fluid. The electric plug valve can only be fully opened and fully closed and cannot be adjusted or throttled. The gate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valves form a wedge, and the wedge angle varies with the valve parameters. Principle: There is a round opening of a diameter on the gate, and the opening and closing of the gate makes the round opening on the gate to completely separate from and match with the diameter. Electric three-way valves are used for air conditioning, thermal ventilation, heat treatment in heat treatment plants, and industrial fluid control. Air-conditioning, heating, ventilation, domestic hot water and other civil systems and chemical, petroleum and metallurgical and fluid automation. Our dust collection s...
Post a Comment
Read more

Electrostatic Dust Precipitator

  1. Introduction of electrostatic dust precipitators   The power supply of the electrostatic precipitator consists of a control box, a step-up transformer and a rectifier. The output voltage of the power supply also has a great influence on the dust removal efficiency. Therefore, the operating voltage of the electrostatic precipitator must be maintained at 40-75kV or even above 100kV.   2. Basic structure of electrostatic dust precipitators   The electrostatic dust precipitators  are composed of two parts: one part is the main system of the electrostatic precipitator; the other part is the power supply device that provides high-voltage direct current and the low-voltage automatic control system. The high-voltage power supply system supplies power to the step-up transformer, and the dust collector of the dust collector is grounded. The low voltage electric control system is used to control the temperature of the electromagnetic vibrating hammer, the ash discharg...
Post a Comment
Read more