Skip to main content

Electric Ventilation Butterfly Valve

 The electric ventilation butterfly valve is mainly used in the dusty cold air or hot air gas pipelines for ventilation, environmental protection projects in metallurgy, chemical industry, building materials, power stations, glass and other industries, and is used as a gas medium to regulate flow or cut off devices.

 

Features of Electric Ventilation Butterfly Valve:

It is designed and manufactured with a new type of structure welded with a midline plate and a short structure steel plate. It has a compact structure, lightweight, large circulation, avoids the influence of high-temperature expansion, and is easy to operate.

Long service life, can be installed in multiple stations, not affected by the media flow

 

Electric ventilation butterfly valve is a kind of non-sealed butterfly valve. It is widely used in pipelines with medium temperature ≤300°C nominal pressure 0.1Mpa for building materials, metallurgy, mining, electricity and other production processes to connect, open and close or adjust the amount of medium.

 

The electric ventilation butterfly valve is processed into a seal ring with the same material as the valve body and is electrically or pneumatically driven. Its applicable temperature depends on the valve body selection, nominal pressure ≤ 0.6MPa, generally suitable for industrial, metallurgical, environmental protection and other pipelines for ventilation regulation media flow use. Its main features are:

The design is novel, reasonable, unique structure, light weight, rapid opening and closing.

small operating torque, easy operation, effort, and dexterity.

The use of adapted materials to meet the low, medium and high temperature of different media and corrosive media.

Gear type double piston, large output torque, small size.

The use of aluminum alloy cylinder material, light weight, beautiful appearance.

Manual operation mechanism can be installed at the top and bottom.

Rack-type connection can adjust the opening angle, rated flow.

Actuators can provide feedback indications and various accessories for automatic operation.

IS05211 standard connection provides convenience for installation and replacement of products.

The two-point adjusting screw allows the standard product to have an adjustable range of ±4° at 0° and 90°. Ensure synchronization accuracy with the valve.

 

The electric ventilation butterfly valve is a kind of non-sealed butterfly valve, which is suitable for pipelines with building medium, metallurgy, mining and power production medium temperature ≤300°C nominal pressure of 0.1Mpa, for connecting, opening and closing or adjusting the amount of medium. The electric ventilation butterfly valve is mainly used in the dusty cold air or hot air gas pipelines of ventilation, environmental protection projects in the industries of gold, chemical, building materials, power stations, and glass, etc., and is used as a gas medium to regulate flow or cut off devices. The electric ventilation butterfly valve is designed and manufactured using a new type of structure in which the midline type disc plate is welded to the short structure steel plate.

 

Features:

1. The electric ventilation butterfly valve is designed and manufactured with a new type of structure in which the midline type disc plate is welded to the short structure steel plate, avoiding the influence of high temperature expansion and being light in operation.

2, there is no connecting rod, bolts, etc., reliable, long service life. Can be installed in multiple stations without being affected by the flow of media.

3, the design is new, reasonable, unique structure, light weight, rapid opening and closing.

4, electric ventilation butterfly valve operation torque is small, easy to operate, effort and dexterity.

5, electric ventilation butterfly valve uses adapted materials to meet the low, medium and high temperature of different media and corrosive media.

 

We provide industrial dust collection systems,contact us now.

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...