Skip to main content

Working Principle of the Dust Bag

  

The bag type dust collector is a dry dust removal device, which is suitable for collecting fine, dry non-fibrous dust. Common filter bags include cloth dust collector bags, felt filter bags, which are made of woven filter cloth or non-woven felt. The filter property of fiber fabric is used to filter the dust-containing gas. When the dust-containing gas enters the bag type dust collector, the particles Large and heavy dust settle down due to gravity and fall into the ash hopper. When the gas containing finer dust passes through the filter material, the dust is blocked and the gas is purified. Generally, the dust removal efficiency of new filter media is not high enough. After the filter material has been used for a period of time, due to the effects of sieving, collision, retention, diffusion, static electricity, etc., a layer of dust accumulates on the surface of the filter bag. This layer of dust is called the primary layer. In the subsequent movement process, the primary layer becomes the main filter layer of the filter. Depending on the function of the primary layer, the filter material with relatively large mesh can also obtain high filtration efficiency.

 

As dust accumulates on the surface of the filter material, the efficiency and resistance of the dust collector increase accordingly. When the pressure difference between the two sides of the filter material is large, some fine dust particles that have been attached to the filter material will be squeezed. The efficiency of the dust collector is reduced. In addition, excessive resistance of the dust collector will significantly reduce the air volume of the dust removal system. Therefore, after the resistance of the dust collector reaches a certain value, it must be cleaned in time. The primary layer should not be destroyed when cleaning dust, so as not to reduce efficiency. The structure of the bag type dust collector is mainly composed of upper box body, middle box body, lower box body (ash bucket), ash cleaning system and ash discharge mechanism.

 

As for the performance of the bag type dust collector, in addition to the correct selection of the filter bag material, the industrial dust collection systems play a decisive role in the bag type dust collector. For this reason, the dust removal method is one of the characteristics to distinguish the bag type dust collector, and it is also an important part of the operation of the bag type dust collector.

 

 


Comments

Popular posts from this blog

Electrostatic Dust Collector

The working principle of the electrostatic dust collector  is to use the high voltage electric field to ionize the flue gas. The dust charge in the air flow is separated from the air flow under the action of the electric field. The negative electrode is made of metal wires with different cross-sectional shapes and is called a discharge electrode. The positive electrode is made of metal plates of different geometries and is called a collecting electrode. The performance of an electrostatic precipitator is affected by three factors, the nature of the dust, the configuration of the equipment, and the flow rate of the flue gas. The specific resistance of dust is an index for evaluating conductivity, and it has a direct effect on the dust removal efficiency. The specific resistance is too low, dust particles are difficult to maintain on the dust collecting electrode, causing it to return to the air flow. The specific resistance is too high, and the dust particles that reach the dus...

The Electromagnetic Valve 2019

Electromagnetic pulse valves (also known as diaphragm valves) are compressed air "switches" for pulse bag filter dust cleaning systems. By the control of the output signal of the pulse jet control instrument, the filter bag is cleaned by one row (chamber), so that the resistance of the filter is kept within the set range, so as to ensure the processing capacity and dust collection efficiency of the filter. DMF-Z electromagnetic pulse valve  is a right-angle valve, and the angle between the inlet and outlet is 90 degrees, which is suitable for the installation connection between the airbag and the dust blower tube. The air flow is unobstructed and it can provide the required clear air pulse. DMF-ZM electromagnetic pulse valve is the same as the "Z" series of the right-angle valve, suitable for airbag and dust collector spray pipe installation connection, the import and export of the two ends with a fixed nut for installation so that installation and us...

Selection Principle of Cyclone Type Dust Collector

  1. Selection principle of cyclone type dust collector   ① The amount of gas purged by the cyclone type dust collector should be consistent with the amount of dust-containing gas that needs to be treated. The diameter of the cyclone type dust collector should be as small as possible. If the required air volume is large, it is advisable to use several small diameter cyclones in parallel.      ② The inlet wind speed of the cyclone dust collector should be maintained at 18~23m/s. When it is too low, the dust removal efficiency will decrease: when it is too high, the resistance loss and power consumption will increase, and the dust removal efficiency will not increase significantly.      ③ The selected cyclone type dust collector  has small resistance loss, low power consumption, simple structure and easy maintenance.      ④ The smallest dust particles that can be captured by the cyclone type dust collector should be slightly smaller than the dust particle siz...